Original Tender Document:
1. Line 4 of "Chapter 5: Tender Invitation 2. Tender Content, Item 01": Control System – adopts an "IPC+PLC" architecture, equipped with ≥2 21-inch color touchscreens and a fully Chinese-language operation interface; features formula management capabilities (capable of storing and retrieving ≥1,000 process formulas), with real-time parameter monitoring and historical data traceability support.
2. In line 9 of "Chapter 5: Tender Invitation 2. Tender Content Number 01": Media Management Center: The electrical and gas pipeline sections of the Media Management Center shall be separated; its enclosure must be fully sealed, and it shall be equipped with appropriate sensors to ensure system safety. The center shall be fitted with combustible gas shut-off valves that will automatically close upon detecting excessive levels of combustible gas beyond safe limits.
3. In line 13 of "Chapter 5: Tender Invitation 2. Tender Content, Item No.01": Plasma spray guns: conventional plasma spray guns with a maximum power of 55 kW; cascade-type plasma spray guns with a maximum power of 55 kW; plasma internal-hole spray guns with a maximum power of 25 kW, capable of spraying workpieces with a minimum inner diameter of 80 mm.
4. In line 14 of "Chapter 5: Tender Invitation 2. Tender Content, Item 01": Supersonic spray gun: Gas-powered supersonic spray gun with a maximum output power of 113 kW and axial powder delivery.
5. In line 15 of "Chapter 5: Tender Invitation 2. Tender Content, Item 01": Flame spray guns: Conventional flame powder spray guns with a maximum power of 35 kW; flame extension spray guns with a spraying angle of 45°.
6. In line 3 of "Chapter 5: Tender Invitation 2. Tender Content Number 03": ★ Explosion-proof device: An explosion-proof door shall be installed behind the oven.
7. In line 4 of "Chapter 5: Tender Invitation 2. Tender Content, Item No.03": Materials and Structure: The cabinet shall be constructed from 304 stainless steel (thickness ≥ 1.5 mm) and equipped with anti-static grounding terminals (grounding resistance ≤ 4 Ω) to prevent electrostatic discharge from igniting the powder.
8. Item 2 of the Technical Evaluation Criteria in Chapter 6 ("Tender Documentation Table – Appendix 1: Evaluation Standards"):
Control System (4 points): Utilizes an "IPC+PLC" architecture, equipped with a 21-inch color touchscreen and a fully Chinese-language operation interface; features formula management capabilities (capable of storing and retrieving ≥1,000 process formulas), and supports real-time parameter monitoring as well as historical data traceability.
Number of required components: Two or more color touchscreens earn 2 points; one color touchscreen earns 1 point; no points for none.
Formula Management Function: 1 point for storing 5,000 production batches; 2 points for storing 10,000 production batches.
(Provide supporting documents such as the manufacturer's product manual and mark them in the appropriate section of the tender documents.)
9. Item 4 of the Technical Evaluation Criteria in Chapter 6 ("Tender Documentation Table – Appendix 1: Evaluation Standards"):
Plasma spray guns (2 points): Conventional plasma spray guns have a maximum power of 55 kW; cascaded plasma spray guns also have a maximum power of 55 kW; plasma internal-hole spray guns have a maximum power of 25 kW and can be used to spray workpieces with a minimum inner diameter of 80 mm.
To meet the technical requirements, a total of one each of the three aforementioned plasma nozzles must be provided; an additional plasma nozzle will earn 2 points, while failure to comply will result in zero points.
(Provide supporting documents such as the manufacturer's product manual and mark them in the appropriate section of the tender documents.)
10. In Section 1.4 of "Chapter 8: List of Product Requirements and Technical Specifications II – Technical Specifications and Requirements": The control system adopts an "IPC+PLC" architecture, equipped with ≥2 21-inch color touchscreens and a fully Chinese-language operation interface; it features formula management capabilities (capable of storing and retrieving ≥1,000 process formulas) and supports real-time parameter monitoring and historical data traceability.
11. In Section 1.9 of "Chapter 8: List of Material Requirements and Technical Specifications II. Technical Specifications and Requirements": The electrical components and gas piping systems of the Media Management Center shall be separated; its enclosure must be fully sealed and equipped with appropriate sensors to ensure system safety. The center shall be fitted with combustible gas shut-off valves that will automatically close when combustible gas levels exceed safe limits.
12. In Section 1.13 of "Chapter 8: List of Material Requirements and Technical Specifications II. Technical Specifications and Requirements": Plasma spray guns: Conventional plasma spray guns have a maximum power of 55 kW; cascade-type plasma spray guns have a maximum power of 55 kW; plasma internal-hole spray guns have a maximum power of 25 kW and can be used to spray workpieces with a minimum inner diameter of 80 mm.
13. In Section 2 ("Technical Specifications and Requirements") of Chapter 8 ("List of Goods Requirements and Technical Specifications"), item 1.14 states: Supersonic spray gun: The maximum output power of a gas-powered supersonic spray gun is 113 kW; axial powder delivery.
14. In Section 2 ("Technical Specifications and Requirements") of Chapter 8 ("List of Goods Requirements and Technical Specifications"), item 1.15 states: Flame spray gun – The maximum power of a conventional flame powder spray gun shall be 35 kW; the spraying angle of an extended flame spray gun shall be 45°.
15. In Chapter 8 "List of Goods Requirements and Technical Specifications II. Technical Specifications and Requirements", section ★3.3 states: Explosion-proof device – An explosion-proof door shall be installed at the rear of the oven.
16. Section 3.4 of "Chapter 8: List of Goods Requirements and Technical Specifications II. Technical Specifications and Requirements" states: Materials and Structure: The cabinet shall be constructed from 304 stainless steel (thickness ≥ 1.5 mm) and equipped with anti-static grounding terminals (grounding resistance ≤ 4 Ω) to prevent electrostatic discharge-induced ignition of the powder.
17. In Chapter IX "Annexes and Bid Template Format – Format IV-9-5 Certificate Format": The undersigned hereby authorizes and requests that any bank contacted provide the tenderer with all required documents to verify this statement as well as our company's financial strength and credibility. A credit certificate issued by our bank (Bank Name) is attached hereto.
Now changed to:
1. Line 4 of "Chapter 5: Tender Invitation 2. Tender Content Item No.01": Control System – adopts an "IPC+PLC" architecture, equipped with at least one 21-inch color touchscreen featuring a bilingual (Chinese/English) operable interface; includes formula management functionality (capable of storing and retrieving ≥1,000 process formulas), with real-time parameter monitoring and historical data traceability support.
2. In line 9 of "Chapter 5: Tender Invitation 2. Tender Content Item 01": Media Management Center: The electrical and gas pipeline sections of the Media Management Center shall be separated, with appropriate sensors installed to ensure system safety. The center shall be equipped with combustible gas shut-off valves that automatically close when combustible gas levels exceed safety thresholds.
3. In line 13 of "Chapter 5: Tender Invitation 2. Tender Content, Item 01": Plasma spray guns: conventional plasma spray guns with a maximum power of ≥55 kW; cascade-type plasma spray guns with a maximum power of ≥55 kW; plasma internal-hole spray guns with a maximum power of ≥25 kW, capable of spraying workpieces with a minimum inner diameter of 80 mm.
4. In line 14 of "Chapter 5: Tender Invitation 2. Tender Content, Item 01": Supersonic spray gun: Axial powder feeding
5. In line 15 of "Chapter 5: Tender Invitation 2. Tender Content, Item No.01": Flame spray gun – spray angle of the flame extension nozzle is 45°.
6. In line 3 of "Chapter 5: Tender Invitation 2. Tender Content Item No.03": ★ Explosion-proof devices: The structure shall be equipped with explosion-proof devices on at least five floors, each capable of supporting a load of ≥50 kg.
7. In line 4 of "Chapter 5: Tender Invitation 2. Tender Content Item No.03": Materials and Structure – The inner liner and cabinet body shall be made of 304 stainless steel (thickness ≥ 1.5 mm) with a capacity ≥ 400 L; equipped with anti-static grounding terminals (grounding resistance ≤ 4 Ω) to prevent electrostatic ignition of the powder.
8. Item 2 of the Technical Evaluation Criteria in Chapter 6 ("Tender Documentation Table – Appendix 1: Evaluation Standards"):
Control System (4 points): Utilizes an "IPC+PLC" architecture, equipped with a 21-inch color touchscreen featuring a bilingual Chinese-English operation interface; incorporates recipe management functionality (capable of storing and retrieving ≥1,000 process recipes), and supports real-time parameter monitoring along with historical data traceability.
Number of required components: Two or more color touchscreens earn 2 points; one color touchscreen earns 1 point; no points for none.
Formula Management Function: 1 point for storing 5,000 production batches; 2 points for storing 10,000 production batches.
(Provide supporting documents such as the manufacturer's product manual and mark them in the appropriate section of the tender documents.)
9. Item 4 of the Technical Evaluation Criteria in Chapter 6 ("Tender Documentation Table – Appendix 1: Evaluation Standards"):
Plasma spray guns (2 points): Conventional plasma spray guns have a maximum power of ≥55 kW; cascade-type plasma spray guns have a maximum power of ≥55 kW; plasma internal-hole spray guns have a maximum power of ≥25 kW and can be used to spray workpieces with a minimum inner diameter of 80 mm.
To meet the technical requirements, a total of one each of the three aforementioned plasma nozzles must be provided; an additional plasma nozzle will earn 2 points, while failure to comply will result in zero points.
(Provide supporting documents such as the manufacturer's product manual and mark them in the appropriate section of the tender documents.)
10. In Section 1.4 of "Chapter 8: List of Goods Requirements and Technical Specifications II – Technical Specifications and Requirements": The control system adopts an "IPC+PLC" architecture, equipped with at least one 21-inch color touchscreen featuring a bilingual (Chinese-English) operable interface; it includes formula management functionality (capable of storing and retrieving ≥1,000 process formulas) and supports real-time parameter monitoring and historical data traceability.
11. In Section 1.9 of "Chapter 8: List of Material Requirements and Technical Specifications II. Technical Specifications and Requirements": The electrical components and gas piping systems within the Media Management Center shall be separated, with appropriate sensors installed to ensure system safety. The center is equipped with combustible gas shut-off valves that automatically close when detecting excessive concentrations exceeding safe limits.
12. In Section 1.13 of "Chapter 8: List of Material Requirements and Technical Specifications II. Technical Specifications and Requirements": Plasma spray guns: Conventional plasma spray guns have a maximum power of ≥55 kW; cascade-type plasma spray guns have a maximum power of ≥55 kW; plasma internal-hole spray guns have a maximum power of ≥25 kW and can be used to spray workpieces with a minimum inner diameter of 80 mm.
13. In Section 1.14 of "Chapter 8: List of Goods Requirements and Technical Specifications II. Technical Specifications and Requirements": Supersonic spray gun – Axial powder feeding
14. In Section 8 "List of Product Requirements and Technical Specifications II. Technical Specifications and Requirements", item 1.15 states: Flame spray gun – the spray angle of the flame extension spray gun shall be 45°.
15. In Chapter 8 "List of Goods Requirements and Technical Specifications II. Technical Specifications and Requirements", section ★3.3: Explosion-proof device: The equipment shall be equipped with an explosion-proof device comprising at least five layers, each capable of bearing a load of ≥50 kg.
16. Section 3.4 of "Chapter 8: List of Goods Requirements and Technical Specifications II. Technical Specifications and Requirements" states: Materials and Structure – The inner liner and cabinet body shall be made of 304 stainless steel (thickness ≥ 1.5 mm) with a capacity ≥ 400 L; equipped with anti-static grounding terminals (grounding resistance ≤ 4 Ω) to prevent electrostatic ignition of the powder.
17. In Chapter IX, "Appendices and Bid Template Format – Format IV-9-5 Certificate Format": The undersigned hereby authorizes and requests that any bank contacted provide the tenderer with all required documents to verify this declaration as well as the company's financial strength and credibility. Attached are the annual audit reports audited by an accounting firm for 2024 or 2025, or a credit certificate issued by our bank (Bank Name).
3、New Content
1.New attachment: Thermal Spray Specification-20260520 (English version).
2.(1) Chapter 5 "Tender Invitation 2. Tender Content" now includes "Item 04: Powder";
(2) In "Chapter 8: List of Goods Requirements and Technical Specifications II. Technical Specifications and Requirements," the section "4. Powder" has been added.
Powder that meets the requirements in the table below:
GE code
GE code Thermal Spray Powder Demand Table: Summary of required quantities of thermal spray powder Quantity
quantity (lb)
C07-003 Aluminum Oxide Powder (GE Spec A50TF87, Class B)
Alumina powder 200
C07-020 Copper-Nickel-Indium Powder (GE Spec. B50TF72, Class A)
Copper-nickel-indium powder 30
C07-016 Nickel-Aluminum Composite Powder (GE Spec. B50TF56 Class A or B)
Nickel-coated aluminum powder 60
C07-015 85:15 Nickel-Graphite Powder (GE Spec B50TF53, Class B)
85:15 nickel-graphite powder 150
C07-022 Aluminum-Nickel Chromium Composite Powder (GE Spec. B50TF119, Class A)
Aluminum-nickel-chromium composite powder 150
C07-025 Cobalt-Molybdenum-Chromium-Silicon Powder (GE Spec. B50TF155, Class A)
Cobalt-molybdenum-chromium-silicon alloy powder 40
C07-027 75% Chromium Carbide; 25% Nickel Chromium Powder (GE Spec. B50TF137, Class A and Class B)
75% chromium carbide; 25% nickel-chromium powder 30
C07-031 Cobalt-Molybdenum-Chromium-Silicon Powder (GE Spec. B50TF190, Class A)
Cobalt-molybdenum-chromium-silicon alloy powder 200
C07-038 Inco 718 Powder (GE Spec. B50TF202, Class B)
Nickel-based high-temperature alloy powder 200
C07-037 Aluminum Silicon Polyester Powder, (GE Spec. B50TF222, Class A and Class C)
Aluminum-silicon polyester powder 200
C07-032 Nickel Chromium Aluminum Yttrium Powder (GE Spec. B50TF192, Class A)
Nickel-chromium-aluminum-yttrium powder 40
C07-035 Zirconium Oxide-Yttrium Oxide Composite Powder (GE Spec. A50TF278, Class C)
Zirconium oxide-yttrium oxide composite powder 200
C07-041 Inconel 718 Powder HVOF Application (GE Spec. B50TF202, Class D)
Nickel-based high-temperature alloy powder for use in HVOF (High-Vapor-Oxygen Fusion) applications 60
C07-043 Nickel-Chromium-Aluminum Wire
Nickel-chromium aluminum alloy wire 100
C07-052 Alloy Powder Rene 80, (GE Spec. B50TF183, Class B)
Nickel-based casting high-temperature alloy powder 30
3. Chapter 8 "List of Goods Requirements and Technical Specifications – I. Technical Specifications and Requirements" has added "Item 04 Powder": Quantity: 15; Unit: portions; Delivery deadline: within 12 months after the contract takes effect, to the location specified by the user.
4、Change to Bid Opening Time
Original bid opening time:
Bid opening time: 9:30 AM on June 22,2026
Bid Opening Location: Room 5, Bid Opening Area, 5th Floor, Jinghang Hotel, No.51 Lantian Road, Meilan District, Haikou City
Now changed to:
Bid opening time: 9:30 AM on June 23,2026
Bid Opening Location: Room 5, Bid Opening Area, 5th Floor, Jinghang Hotel, No.51 Lantian Road, Meilan District, Haikou City
V. Other Supplementary Matters
Other contents of the tender documents remain unchanged.
VI. Contact Information
1. Tenderer Information
Tenderer: Haikou Airport Aviation Engine Maintenance Engineering Co., Ltd.
Address: No.1, Haikou Airport Comprehensive Bonded Zone, Jiangdong Airport Economic Area, Haikou City, Hainan Province
China General Consulting & Investment Co., Ltd. entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.pcram.com.cn on2026-06-05
1、Bidding Conditions
Overview:China General Consulting Investment Co., Ltd., entrusted by the tenderer Haikou Airport Aero-engine Maintenance Engineering Co., Ltd., is conducting an international competitive bidding process for the relevant equipment. The funding for this project has been secured, with the funds sourced from the company's own resources, and the project is now ready for bidding. Qualified bidders are hereby invited to submit sealed bids for the following goods and related services.
Source of Funds:The self raised funds of the enterprise have been implemented
Description of The Prepared Bidding Conditions:The funding for this project has been secured and the bidding conditions are met
2、Bidding Content
Bidding No:2948-264KGHAEME01
Project Name:Haikou Airport Aero-engine Maintenance Engineering Co., Ltd. Thermal Spraying System and Associated Equipment Procurement Project
Place of Implementation:Hainan Province
List of Products:
| NO. | Product Name | Quantity | Main Technical Data | Remarks |
| 1 | Thermal Spray System | 1 Unit/Set | ★Process Capabilities: The system must support four process capabilities-plasma spraying (APS), high-speed oxygen-fuel spraying (HVOF), combustion spraying, and arc-wire spraying-to meet surface repair requirements for GEnx-series aero-engine components such as blades, casings, and combustion chambers. ★Core Unit Brand Requirements: Key components such as spray guns, power supplies, and powder feeders must utilize mature products from internationally renowned brands (suppliers must provide the brand, model, and technical specifications). Robot Configuration: Equipped with an integrated industrial-grade six-axis robot, featuring repeatability positioning accuracy of ≤±0.05 mm, with payload capacity meeting the weight requirements for the heaviest spray gun and auxiliary devices (≥20 kg). Control System: Utilizes an "IPC+PLC" architecture, equipped with ≥2 21-inch color touchscreens and a fully Chinese-language operation interface. Features formula management capabilities (capable of storing and retrieving ≥1,000 process formulas), with real-time parameter monitoring and historical data traceability support. Safety Protection: The facility is equipped with comprehensive safety features including spray-coated enclosures, dust collection and filtration systems, exhaust gas treatment units, explosion-proof lighting, emergency stop buttons, and safety interlocks such as light screens and door locks, all compliant with China's Occupational Safety and Health Law, Environmental Protection Law, and standard GB 5226.1. The imported equipment control system meets the following protection ratings: Electrical Protection Grade ≥ IP54; Gas Protection Grade ≥ IP43. Production capacity requirements: The annual design processing capacity must meet the coating repair requirements for maintaining components of 100 GEnx engines. ★Data Acquisition: Features comprehensive data collection and recording capabilities, enabling export of process parameters (e.g., current, voltage, air pressure, powder feeding rate), equipment status, fault alarms, and other information in CSV/Excel format. Media Management Center: The integrated Media Management Center is designed for plasma processing, supersonic processing, and flame spraying processes, utilizing gases including but not limited to hydrogen, argon, helium, nitrogen, and oxygen. The accuracy of the net gas flow rate measurement in the Media Management Center exceeds ±2% of the operational range. Media Management Center: The electrical components and gas piping sections of the Media Management Center must be separated. The center's enclosure must be fully sealed and equipped with appropriate sensors to ensure system safety. A combustible gas shut-off valve is installed in the Media Management Center; upon detecting excessive levels of combustible gas beyond safety thresholds, the control system will automatically shut off the supply. Plasma power cabinet: A chopper power supply device (secondary chopper switch amplifier) based on Insulated Gate Bipolar Transistor (IGBT) technology, with an output setting range of 100–1200 A and an output voltage of 90–240 V. The voltage and current are displayed in real-time on the control system panel. Maximum rated power: 120 kW. Dual-drum Powder Feeder: This volume-based scraper-disk type feeder is equipped with 12 powder drums, each designed for plasma, ultrasonic, and flame spraying processes. The two powder drums are controlled by two independent mass flow controllers, allowing operation in either independent or simultaneous modes as required. It can handle powder particle sizes ranging from 5 to 200 μm, with a maximum feeding speed of 160 g/min. Spray guns: Seven spray guns (including internal-hole and extended models) procured for this project, each suitable for plasma, supersonic, flame spraying, and arc spraying processes. Plasma spray gun: Conventional plasma spray guns have a maximum power of 55 kW; cascade-type plasma spray guns also have a maximum power of 55 kW; plasma inner-hole spray guns have a maximum power of 25 kW and can spray workpieces with a minimum inner diameter of 80 mm. Supersonic spray gun: The gas-powered supersonic spray gun has a maximum output power of 113 kW and features axial powder feeding. Flame spray gun: The maximum power of a conventional flame powder spray gun is 35 kW; the spray angle of a flame extension spray gun is 45°. Arc Sprayer: The machine-mounted arc sprayer is designed for the push-pull wire feeding method. Manufacturer's After-sales Capability: The equipment manufacturer maintains an in-house after-sales service team in China, with after-sales engineers possessing extensive professional experience. They are capable of providing timely after-sales services including installation, commissioning, training, fault diagnosis, and equipment calibration. The manufacturer's coating process development capability: The equipment manufacturer's domestic after-sales technical service institutions possess professional technicians specializing in spray coating process development, along with dedicated coating testing and evaluation facilities, enabling them to conduct coating development and provide technical guidance. Manufacturer's Qualifications: The production equipment manufacturer must possess copies of the ISO 9001 Quality Management System Certificate and ISO 14001 Environmental Management System Certificate, or equivalent certification from a local thermal spraying institution. | |
| 2 | Thermal Spray Gas Pipeline and Monitoring System | 1 Unit/Set | ★ Pipeline Design and Installation: Based on the site layout, design, manufacture, and install process gas pipelines (including reflux discharge systems) from the gas station (gas cylinder storage area) to the equipment gas consumption points; each pipeline shall be equipped with a pressure reducing valve (installed near the medium management center) to ensure stable gas supply pressure. ★Safety Monitoring: The system includes a gas leak detection and alarm device (covering all gas usage points, pipeline joints, and gas cylinder areas) and a centralized gas pressure management system (providing real-time pressure monitoring, automatic regulation, and over-limit alarms). ★Scope of pipeline engineering: includes cylinder mounting devices, cylinder connection interfaces, and renovation of designated cylinder storage areas (the storage area must be ventilated, explosion-proof, and clearly labeled). Compressed Air System: Includes an additional air storage tank (capacity ≥1 m3) and a three-stage filtration system (with filtration efficiencies of 5 μm, 1 μm, and 0.01 μm), equipped with automatic/dcheduled drainage functionality (drainage cycle adjustable, ≤8 hours per cycle). ★ Gas chamber renovation: The existing workshop shall be converted into a standard-compliant gas chamber (including ventilation systems, explosion-proof electrical equipment, safety signage, and emergency lighting), with all renovation costs borne by the contractor. | |
| 3 | Oven (Powder Storage Cabinet) | 1 Unit/Set | ★Temperature Control: Operating range 20–250°C with temperature fluctuation ≤±2°C; features temperature and humidity monitoring (humidity display accuracy ≤±5% RH), supporting data recording and export. ★ Mobility & Operation: Equipped with casters (universal wheels + brakes) for easy movement. ★ Explosion-proof device: The explosion-proof door is installed at the rear of the oven. Materials and Structure: The cabinet is constructed from 304 stainless steel (thickness ≥1.5 mm) and equipped with anti-static grounding terminals (grounding resistance ≤4 Ω) to prevent electrostatic discharge from igniting the powder. |
3、Qualification Requirements For Bidder
Qualifications or Performance:1)A bidder is a legal entity or other organization that responds to the tender, has obtained the tender documents from the tenderer or the tendering authority, and participates in the bidding competition. Any legal entity or other organization that has not obtained the tender documents from the tenderer or the tendering authority is not permitted to participate in the bidding.
2)Unless otherwise specified, any legal entity or other organization originating from the People's Republic of China or from any country or region with normal trade relations with the People's Republic of China (hereinafter referred to as "qualified source country/region") may submit a bid.
3)Legal persons or other organizations that have a conflict of interest with the tenderer, which may affect the fairness of the tender process, shall not participate in the bidding.
4)Legal entities or other organizations entrusted to participate in the preliminary project consultation and preparation of tender documents shall not bid on the entrusted project, nor shall they prepare tender documents or provide consulting services for the project's bidders.
5)Different entities whose responsible persons are the same individual or that maintain controlling or managerial relationships shall not bid jointly for the same tender package, except when they form a consortium to submit a bid.
6)This project does not accept bids from consortia.
7)Only suppliers that are legally and financially independent, operate in compliance with regulations, and are separate from both the tenderer and the tendering authority are eligible to participate in the bidding process.
8)Bidders shall successfully register (for free) on the China International Bidding Network (hereinafter referred to as the "Bidding Network," URL: http://www.pcram.com.cn) before the bid submission deadline specified in the tender documents. Otherwise, bidders will be ineligible to participate in the bidding process, and shall bear all resulting consequences themselves.
By the bid submission deadline, Chinese bidders listed as major tax violation and dishonest entities on the "Credit China" website (www.creditchina.gov.cn) or identified as dishonest judgment debtors on the "China Enforcement Information Disclosure Network" website (zxgk.court.gov.cn) shall not participate in the project procurement activities. Bidders must strictly comply with relevant Chinese laws, regulations, and rules, and their bid documents must conform to the applicable Chinese legal provisions. (A website screenshot bearing the official seal must be provided, with the query date no earlier than the announcement publication date.)
Joint Bids:NOT Available
Bid without the bidding documents:NOT Available
4、Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:2026-05-09
Ending of Selling Bidding Documents:2026-05-15
Sell bidding？doc？online？or？not:No
To Obtain::On-site Purchase
Place:the China General Tendering Website (http://www.china-tender.com.cn)
Price of Bidding Documents:￥800/$120
Additional Instructions:(1) Interested bidders may purchase the documents from the China General Tendering Website at http://www.china-tender.com.cn.
(2) When purchasing tender documents from the website, the bidder must provide the invoice information of the purchasing company. The finance department will issue electronic invoices based on the provided information. Any errors or missing information will result in the bidder bearing all consequences.
(3) Contact number: 400-680-8126.
5、Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2026-06-23 09:30
Place of Bid:Room 5, Bid Opening Room, 5th Floor, Jinghang Hotel, No.51 Lantian Road, Meilan District, Haikou City
Place of Bid Opening:Room 5, Bid Opening Room, 5th Floor, Jinghang Hotel, No.51 Lantian Road, Meilan District, Haikou City
6、Contact Details
Purchasers:Haikou Airport Aeroengine Maintenance Engineering Co., Ltd
Add.:No.1, Haikou Airport Comprehensive Bonded Zone, Jiangdong Airport Economic Zone, Haikou City, Hainan Province
Contact:Engineer Fu, Engineer Ma
Tel:0898-66515985,15200163919
Bidding Agency:China General Consulting & Investment Co., Ltd.
Add.:Block C, General Times Center, No.1 Xiyong Street, Fengtai District, Beijing
13B03, Block B, Haikou China Resources Building, No.7 Mingzhu Road
Contact:Zhu Qiang, Zhou Jingyu
Tel:+86-10-81168624, +86-13699114109
7、Remittance Approach:
Bank(RMB):Head Office Business Department of Bank of China
Bank(USD):Bank of China Xicheng Branch
Account NO.(RMB):778350013348
Account NO.(USD):344161996171
